12
Swift User Manual Lifepro
Re Fitness Collection
13
SECURE THE HANDRAILS
You will need:
2 M8×16mm socket head screws
(C)
, 2 washers
(E)
,
multi-tool
(A)
4
M8×16mm
Screw (2)
UNFOLD THE TREADMILL
You will need:
1 security knob
(I)
3
Left
Side
Left
Side
Security Knob
Bracket
Bracket
Running
Deck
1. Ensure the treadmill is positioned
with the running deck and
handrails pointing
UP
.
2. With one hand, grasp the top end
of the running deck.
3. With your other hand, pull the
black release knob at the top of
the left upright post to release
the running deck.
4. Using both hands, lower the
running deck to the floor.
The upright posts are now at
approximately an 80° angle with
the running deck.
5. Insert the security knob
(I)
through the screw hole in the
security knob bracket and the
screw hole in the side of the
running deck.
6. Tighten the security knob to lock
the running deck in position.
1. Tilt the handrails up so they are
parallel to the floor.
2. Put a washer
(E)
on one of the
screws
(C)
.
3. Insert the screw/washer
combination into the screw hole
on the
INSIDE
of the left upright
post.
4. Tighten the screw using the hex
key end of the multi-tool
(A)
.
5. Repeat steps 2–4 to secure
the handrails to the right
upright post.
Hex Key
Side of
Multi-tool
Washer
(4)
