16
PawRunner User Manual Lifepro
Endurance Training Collection
17
ATTACH THE FABRIC SIDE PANELS TO THE SIDEBARS
You will need:
left fabric side panel
(G)
, right fabric side panel
(H)
6
A
G
E
F
H
INSTALL THE T-KNOB AND T-KNOB POST
You will need:
T-knob
(J)
, T-knob post
(K)
, hex key
(N)
7
1. Screw the T-knob
(J)
clockwise into the threaded insert in the side of
the T-knob post
(K)
. Do not fully tighten the knob yet.
2. Locate the metal tube running along the right side of the treadmill
baseframe
(A)
.
3. Locate the two socket-head screws inserted into the metal tube
towards the front of the treadmill.
4. Use the hex key
(N)
to remove the two screws.
5. Align the T-knob post
(K)
with the two screw holes. The lip on the
T-knob post goes
UP
.
6. Re-insert the two socket-head screws to secure the T-knob post.
7. Use the hex key
(N)
to fully tighten the screws.
K
J
TOOLS & HARDWARE
(N)
1. Identify the left fabric side panel
(G)
: the
Velcro
®
tabs on the backside
of the fabric side panels face to the INSIDE.
The tabs on the backside
of the left panel face
RIGHT
; the tabs on the backside of the right
panel face
LEFT
. See figure below.
2. Stick the bottom strip of Velcro
®
on the back of the left fabric side
panel
(G)
to the corresponding Velcro
®
strip along the left side of the
baseframe
(A)
.
3. Stick the five Velcro
®
tabs on the back of the left side panel
(G)
to the
corresponding tabs on the left sidebar
(E)
and crossbar
(C)
. Reposition
the tabs along the sidebar and crossbar, if necessary to line up the
Velcro
®
.
4. Repeat steps 2–3 to attach the right fabric side panel
(H)
in the same
manner.
