Lifepro PAWRUNNER, Руководство пользователя

Страница: 16 / 27

30 PawRunner User Manual Lifepro Endurance Training Collection 31
POWER ON THE TREADMILL
1. Plug the power cord into a grounded wall outlet.
2. Flip the power switch at the front of the motor housing to the ON
position. The console will light up and all values will be set to zero.
POWER OFF AND UNPLUG THE PAWRUNNER
1. Remove the safety key and store it in a separate location.
2. Flip the power switch to the OFF position.
3. Unplug the power cord from the wall outlet.
2
1
STARTING THE TREADMILL
1. Ensure your pet is in place on the treadmill, on leash, and ready to go.
2. Secure your pet’s leash to the treadmill crossbar. See
DETERMINING
APPROPRIATE LEASH LENGTH on page 21.
3. Power on the treadmill and begin a workout. See
CREATING A
WORKOUT
on pages 31–33 for instructions.
STOP THE TREADMILL AND UNHOOK YOUR PET
1. Press the red Stop button to stop the running belt.
2. Wait until the treadmill has come to a complete stop before
unhooking your pet from the crossbar.
2
1
PLACE THE MAGNETIC SAFETY KEY
The safety key MUST be in place before the treadmill can be operated.
The safety key cuts power to the treadmill in case your pet falls or an emergency
occurs. See
USING THE MAGNETIC SAFETY KEY
on page 9.
1. Place the safety key on the round magnetic port on the console.
2. Clip the other end of the safety key securely to your pet’s collar.
3. Give the clip a tug to make sure it won’t release from the collar.
STARTING THE TREADMILL
STOPPING THE TREADMILL
CREATING A COUNTDOWN-MODE WORKOUT
Three countdown modes allow you to set a specific exercise goal, time,
distance, or a certain number of calories to be burned, for your pet’s
workout. During the workout, the specific exercise goal will count down and
the treadmill will automatically stop when the goal is reached.
TIME COUNTDOWN MODE
1. Press the Mode button once to choose time countdown mode. The red
LED next to “Time” will be lit.
2. The default time “30:00” will flash on the screen. Enter the desired
exercise time, from 5:00–99:00 minutes, in one-minute increments, by
pressing the
+/- buttons .
3. Press the Start/Stop button to begin the workout.
4. Use the +/- buttons to adjust the speed at any time during your
workout.
DISTANCE COUNTDOWN MODE
1. Press the
Mode button
twice to choose distance countdown mode. The
red LED next to “Dist.” will be lit.
2. The default distance “1.00” will flash on the screen. Enter the desired
distance, from 0.4–99 miles, by pressing the +/- buttons .
3. Press the Start/Stop button to begin the workout.
4. Use the +/- buttons to adjust the speed at any time during your
workout.
3