background image

CLEANING AND MAINTENANCE

MAINTENANCE

Please follow this manual to maintain the ice maker, in order to improve its reliability and 

service life. And while maintaining hygiene, avoid the increase of energy consumption 

coefficient for the ice production.

1. Always clean the surroundings of the appliance to keep it clean. Do not block the 

shutters of it.

2. The exterior can be cleaned with a neutral detergent solution, and then wiped clean 

with a soft cloth. If necessary, commercial stainless steel cleaners and polishing agents 

can be used.

3. The filter element should be checked regularly. Most common filter elements are 

replaced half a year, and advanced filter elements should be replaced on time in 

accordance with the instructions.

4. It can use a water pipe to flush directly, when cleaning the inside of the ice maker's 

water tank and refrigerator. Never over pressure, and never flush the pump and above 

the ice tray directly, to prevent the circuit parts from being immersed.

5. Maintenance of condenser for air-cooled ice maker: Clean the air-cooled condenser 

every three months. Use a soft brush or a vacuum cleaner with a brush to scrub the 

condenser fins up and down in the direction of the fins to avoid damaging the fins and 

affecting the cooling performance.

Overwintering maintenance: In addition to turning off the power resource, drain the 

residual water in the ice maker's water tank, inlet pipe and drain pipe.

[email protected]

[email protected]

- 32 -

ATTENTION

1. Cleaning and maintenance of the ice maker is not included in the our free service. We 
suggest you use filtered water.

2. Before cleaning and maintenance, please make sure to cut off the power supply.

3. Please cut off the water source before pulling out the water inlet hose of the ice 
machine to prevent high-pressure water splashing.

4. On-site service charges will be charged when there is a failure due to user errors

(such as no water, no electricity, environmental factors, etc.).

5. You should clean the ice maker regularly to prevent the internal pipes from being 
blocked by scale. You can buy detergent to remove scale and use it with self-cleaning.

6. The edges of the air-cooled condenser fins are sharp, so please be careful when 

cleaning.

7. The ice maker's consumables are not covered by the warranty. In case of damage, 
please buy it at the local store.

Содержание DBJ-45



































Отзывы: