OPERATING INSTRUCTIONS
ICE-MAKING:
1. After all the water hoses are hooked up, then plug in the power supply.
2. Click On/Off button to start the machine, then compressor will start to run
about 3 minutes to pre-cooling. Then click or button to adjust the time of ice
making to get different thickness of ice. The adjusted ice making time will be reflected in
the next round of ice making. (Please refer to page 13 for the ice making time range.)
3. After 3 minutes, the water pump in the ice maker start working, ice making begins.
During the ice making process, the water pump will last running, and the water will flow
down from the top of the ice tray.
4. When the ice is made, it will take about 3.5 minutes to peel off the ice. Remember
to separate the ice with a shovel, otherwise the ice machine may indicate ice full when
the ice bin only holds half of the ice .
(Note: you must wait for the water shortage indicator to go out before you can make
ice.)
ICE-HARVEST:
During the ice-harvest process, the ice tray will be heated for about 3.5 minutes, then
the ice will fall off.
When each batch of ice falls off to the ice bin, the ice may not be completely separated.
I suggest you use the ice shovel to separate the ice to hold more ice.
When the ice falls, the flap will be flipped, and then the flap will reset due to its own
weight, then the machine starts to make the next round of ice. When the ice bin holds a
lot of ice, the flap will be pressed by the ice and cannot be reset. At this time, the ice full
indicator will light up, and the ice maker will stop making ice to prevent too much ice
from being made.
FORCE ICE-HARVEST:
During the ice making process, click the ice-harvest button , the unit will enter the
ice-harvest program in advance, and will continue to run the next ice-making round
after the ice falls into the ice bin.
NOTE:
1. When each batch of ice fall off to the ice bin, please use an ice spoon to shovel
them into 45 small ice cubes to hold more ice.
2. It is recommended to put the extra ice cubes produced in an ice bag and store it in
the ice bin.
3. In summer and hot environment, it is recommended to adjust the ice thickness
range: 15 to 29 min.
In winter and cold environment, it is recommended to adjust the ice thickness range:
10 to 18 min.
ATTENTION˜
The adjusted ice making time will be reflected in the next round of ice making.
ONE-BUTTON BLUE LIGHT:
During ice making process, press the blue light button, it will light up inside the box, which
can make the ice making programs absolutely clear.
OFF-TIMER AND ON-TIMER SETTING:
After power-on, during the unit is in off-state, press the Timer button, the digital window
will flash to display the setting delay time. Press the " " or " " button to adjust
the delay time of the timer, the system will enter the On-Timer mode automatically
5 seconds after setting.
Off-Timer: After power-on, during the ice making process, press the Timer button, the
digital window will flash to display the setting delay time. Press the " " or " "
button to adjust the delay time of the timer, the system will enter the Off-Timer mode
automatically 5 seconds after setting.
CLEANING FUNCTION:
After power-on, connect the water resource, press the cleaning button , the unit will
enter the automatic cleaning program, and it will automatically stop after 10 minutes. After
the cleaning program is finished, please remove the drain plug and drain the sewage.
- 23 -
