LifeCore Fitness LC-CD600, Руководство пользователя

Страница: 27 / 33

27 | P a g e
Has a
thumping
sound
9
Retighten all bolts associated with the assembly process. Please review Figure
1 thru Figure 8. Use assembly lithium grease as needed.
9
Check the wheels Part # 2CU8 Shaft Wheel w/ball bearing and make sure that
they are clean and free from dirt. Use Windex and a towel to clean the wheels
and the wheel track. These wheels must be clean in order for it to cycle
smoothly.
9
Contact technical support toll free 1-888-815-5559
Unit has a
grinding
noise
*sounds
like a
generator
9
Check each one of the bearings to make sure they roll smoothly.
9
Contact technical support toll free 1-888-815-5559
Unit
wobbles
and is
unstable on
the floor
9
Check to see if the leveler feet (Page 14 Assembly) on the bottom of the
machine are level with the ground. Adjust as needed to level machine.
9
If unit is placed on hard surface, the machine will need to have a mat placed
under the machine to prevent the leveler feet from breaking and to reduce
friction noise while cycling.
9
Retighten all bolts associated with the assembly process. Please review Figure
1 thru Figure 8. Use assembly lithium grease as needed.
9
Contact technical support toll free 1-888-815-5559
Handle bars
are loose or
wobble
9
Retighten the bolts that connect the arms and or stationary heart rate handle
bar. Also, retighten the mast bolts associated with Figure 8 & 6 in the
assembly guide.
9
Contact technical support toll free 1-888-815-5559
Squeaking/
creaking
noise
9
Retighten all bolts associated with the assembly process. Please review Figure
1 thru Figure 8. Use assembly lithium grease as needed.
9
Pivot points will need to be lubricated with lithium grease.
9
Contact technical support toll free 1-888-815-5559