9
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Position the Front Stabilizer (10) in front of Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (10) onto the front curve of the Main Frame (1) with two M10x57
Carriage Bolts (12), two Ø8 Big Curve Washers (14), and two M8 Cap Nuts (15). Tighten
cap nuts with the Multi Hex Tool provided.
Position the Rear Stabilizer (11) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (11) onto the rear curve of the Main Frame (1) with two M10x57
Carriage Bolts (12), two Ø8 Big Curve Washers (14), and two M8 Cap Nuts (15). Tighten
cap nuts with the Multi Hex Tool provided.
Hardware:
Tool:
Multi Hex Tool
15
14
12
11
10
12
15
14
1
(12) Carriage Bolt
M8x70
4 PCS
(14) Big Curve Washer Ø8
4 PCS
(15) Cap Nut M8
4 PCS