10
2. Front Post Installation
Remove four M8x15 Bolts (41), four Ø8 Spring Washers (89), and four Ø8 Big Curve
Washers (14) from the Main Frame (1). Remove bolts with the 5mm Allen Wrench
provided.
Put the cable end of resistance cable of Tension Control Knob (54) into the spring hook of
Tension Cable (30), see Figure A. Pull the resistance cable of Tension Control Knob (54)
up and force it into the gap of metal bracket of Tension Cable (30), see Figure B.
Connect the Sensor Wire (68) from the Main Frame (1) to the Extension Sensor Wire (67)
from the Front Post (5).
Insert the Front Post (5) onto the tube of the Main Frame (1) and secure with four M8x15
Bolts (41), four Ø8 Spring Washers (89), and four Ø8 Big Curve Washers (14)that were
removed. Tighten bolts with the 5mm Allen Wrench provided.
30
30
54
54
A
B
Tool:
Allen Wrench 5mm
68
67
30
5
54
1
54
14
41
14
41 89
89
