16
OPERATING THE COMPUTER
SPECIFICATIONS:
TIME---------------------------------------------------- 0:00-99:59 MIN: SEC
SPEED ------------------------------------------------ 0.0-999.9 KM/H
DIST (DISTANCE) ---------------------------------- 0.0-999.9 KM
CAL (CALORIES) ----------------------------------- 0.0-999.9 KCAL
ODO (ODOMETER) -------------------------------- 0.0-999.9 KM
(PULSE) ------------------------------------------ 40-240 BEATS/MIN
USING YOUR COMPUTER
The computer can be activated by pressing the buttons or by pedaling. If you leave the
equipment for 4 minutes, the power will turn off automatically.
BUTTON FUNCTIONS:
MODE:
Press the MODE button to select each function of computer.
Press and hold the MODE button for 3 seconds, all data values will clear to zero except the
ODO (ODOMETER) data values.
SET:
Press the SET button to set data values of TIME, DISTANCE, CALORIES, or PULSE
for target pre-setting.
RESET:
Press the RESET button to clear data values of TIME, DISTANCE, or CALORIES to
zero.
Press the RESET button to clear data values of TIME, DISTANCE, CALORIES, or PULSE to
zero for target pre-setting.
Press and hold the RESET button for 3 seconds, all data values will clear to zero except the
ODO (ODOMETER) data values.
COMPUTER FUNTIONS:
SCAN:
Press the MODE button until the screen displays SCAN; the computer will
automatically scan the function of TIME, SPEED, DIST (DISTANCE), CAL (CALORIES),
ODO (ODOMETER), and
(PULSE) every 6 seconds.
TIME:
Displays your elapsed workout time in minutes and seconds. You may also pre-set
target time in STOP mode before training. To set TIME press the MODE button until you
see the TIME begin blinking. Press the SET button to change the time, each time you
press the SET button TIME should change by 1 minute. Press the RESET button to clear
the target time to zero. The pre-set target time range is from 0:00 to 99:00 minutes. Once
you pre-set target time and then start to exercise, time starts counting down from pre-set
target time to 0:00 per 1 second backward. When the pre-set target time counts down to
0:00, time will start to count up immediately and the computer will begin beeping to remind
you.
SPEED:
Display the current training speed.
