7
ASSEMBLY INSTRUCTIONS
1. Front/Rear Stabilizers and Right/Left Foot Pedals Installation
Position the Front Stabilizer (6) in front of the Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (6) onto the front curve of the Main Frame (1) with two M10x57
Carriage Bolts (29), two Ø10 Curve Washers (30), and two M10 Cap Nuts (31). Tighten
cap nuts with the Multi Hex Tool provided.
Position the Rear Stabilizer (4) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (4) onto the rear curve of the Main Frame (1) with two M10x57
Carriage Bolts (29), two Ø10 Curve Washers (30), and two M10 Cap Nuts (31). Tighten
cap nuts with the Multi Hex Tool with Phillips screwdriver provided.
Foot Pedals Installation
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and
“L” for Left.
Insert the pedal shaft of Left Foot Pedal (46) into threaded hole in the left Crank (47). Turn
the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the
threads.
Tighten the pedal shaft of Left Foot Pedal (46) with the Multi Hex Tool provided.
Insert pedal shaft of Right Foot Pedal (48) into threaded hole in right Crank (47). Turn the
pedal shaft by hand in the clockwise direction until snug.
Tighten pedal shaft of Right Foot Pedal (48) with the Multi Hex Tool provided.
Hardware:
(29) Carriage Bolt
M10x57
4 PCS
(30) Curve Washer Ø10
4 PCS
(31) Cap Nut M10
4 PCS
29
30 31
48
46
31
30
31
30
29
4
6
1
47
Multi Hex Tool
S10, S13, S17, S19
Tool:
