Life Gear 20296 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 19

Life Gear 20296 Скачать руководство пользователя страница 11

10

4. Handlebar and Computer Installation

Insert the Hand Pulse Sensor Wires (18) into the hole on the Handlebar Post (3) and then
pull them out from the top end of the Handlebar Post (3). Place the Handlebar (2) through
clamp on the Handlebar Post (3) with hand pulse sensors facing the seat.
Hold the Handlebar (2) in desired position and fasten Clamp Cover (15), Ø12x20x1.5 Spacer
(16), and M8x55 Handlebar T-Knob (17) onto clamp. Tighten the M8x55 Handlebar T-Knob
(17) after adjustment.

NOTE:

M8x55

Handlebar T-Knob should be tightly secured before using.

Remove four M5x10 Bolts (25) from the Computer (26).    Remove bolts with the Multi Hex
Tool with Phillips Screwdriver provided.    Connect the Hand Pulse Sensor Wires (18) and
Extension Sensor Wire (28) to the wires that come from the Computer (26).    Tuck wires into
the Handlebar Post (3).    Attach the Computer (26) onto the top end of the Handlebar Post
(3) with four M5x10 Bolts (25) that were removed.    Tighten bolts with the Multi Hex Tool with
Phillips Screwdriver provided.

Multi Hex Tool with Phillips Screwdriver

S10, S13, S14, S15

Tool:

«
...
9
10
11
12
13
...
»

Содержание 20296




















Отзывы:

Нет отзывов