31
FOR 95C/97C ELEVATION DISCOVER SI UNITS ONLY:
3.
Cable Routing
3a.
Carefully pull the COAXIAL CABLE from inside the CONSOLE BRACKET (15).
3b.
Install the coaxial extension coupler and coaxial extension cable.
3c.
Tape the ends of all CABLES
(Power, Coaxial, I-R Remote Control, Video)
together.
4.
Feed the taped end of the MEDIA CABLES (12) through the large hole in the back of the CONSOLE BRACKET (15).
Carefully pull excess media cable through the CONSOLE BRACKET.
5
Slide one GROMMET (16) over the taped end of the MEDIA CABLES (12).
6.
Hold the MAIN BRACKET ASSEMBLY (5) close to the CONSOLE BRACKET (15) as shown. With the holes facing
upward, feed the taped end of the MEDIA CABLES (12) through the bottom large hole of the main bracket
assembly and out of the upper hole as shown. Carefully pull excess media cable through the main bracket assembly.
7. Slide the remaining GROMMET
(16) over the taped end of the
MEDIA CABLES (12). Install the
grommets into the access holes.
8. Install the MAIN BRACKET CAPS
(19) to the top and bottom of the
MAIN BRACKET ASSEMBLY (5).
9. Secure the MAIN BRACKET
ASSEMBLY (5) using four
SCREWS (17) and WASHERS (18)
as shown. Tighten the screws
securely. (8-10 ft. lbs.)
10.
Connect Cables to Console
10a.
Attach the three MEDIA CABLES
(12) to the back of the Discover
SI CONSOLE as shown.
Remote
High-Def
Power
Cross-Trainer & Bikes
Elevation Discover SI Console
95C/97C ELEVATION DISCOVER SI UNITS ONLY
19
19
17
18
16
9
15
12
5
