14
12. Connect all cables to their corresponding jacks located on the bottom of the TV (16).
Re move the tape from the end
of the MEDIA CABLES (Power, Coaxial, I-R Remote Control, Video).
See the
Media Connections
pages in this manual for detailed information. Feed any excess media cable into the
MAIN BRACKET (4).
13. Install the TOP MAIN BRACKET CAP (21) to the top of the MAIN BRACKET ASSEMBLY (4).
14. Replace the REAR CONSOLE COVER (10) and secure it using the previously removed two SCREWS (9).
Tighten the screws securely (8-10 ft. lbs.). Do not overtighten the screws.
15. Slide the BRACKET COVER (7) down to meet the REAR CONSOLE COVER (10). Snap the BRACKET COVER
into the REAR CONSOLE COVER.
16. Align the lowest side holes on the TV BRACKETS (8 &15). Secure the TV BRACKET into proper position
using one SCREW (22) on each side.
17. Plug in the treadmill and power on the treadmill and TV. Refer to the
ATTACHABLE Operation Manual
for
proper TV setup.
21
15
16
18
19
22
4
8
20
7
10
