Life Fitness Elevation 95X-ALLXX-01, Как использовать

Страница: 33 / 40

Elevation 95X-ALLXX-01 Commercial Cross-trainer
“How To…”
59
Bolt
Keyed Washer
Washer
Rocker Assembly
Inner Rocker Assembly
Mounting Screws (12)
Inner Rocker
Assembly Cover
Inner Rocker Assembly
Cover Mounting Bracket
HOW TO... REPLACE THE INNER ROCKER ASSEMBLY COVER
Tools required: Phillips screwdriver, 4mm Allen wrench, 13mm and 19mm socket wrenches
Estimated time required: 60 minutes
1. If the cross-trainer has line cords,
unplug them from the wall outlets.
2. Remove the lower rocker assembly
cover. (See the “How To…” on page 55.)
3. Remove and save the twelve screws and
washers that secure the inner rocker
assembly cover to the inner rocker
assembly cover-mounting bracket.
4. Remove the bolt and keyed washer that
secure the rocker assembly to the main
shaft.
5. Carefully slide the rocker assembly off
the main shaft.
6. Remove the old inner rocker assembly
cover.
7. Place the new inner rocker assembly
cover in position on the main shaft.
8. Carefully slide the rocker assembly onto
the main shaft and position it on the
shaft so that the keyed washer lines up
with the slot in the shaft. Use the bolt
and keyed washer removed in Step 5.
9. Line up the inner rocker assembly cover
mounting holes with the holes in the
inner rocker assembly cover mounting
bracket and secure it with the twelve
screws and washers removed in step 4.
10.
Complete the installation of remaining
components in reverse order.