Life Fitness Elevation 95X-ALLXX-01, Как использовать

Страница: 22 / 40

Elevation 95X-ALLXX-01 Commercial Cross-trainer
“How To…”
48
Rocking Link
Rocking
Link Cover
Phillips
Screw
Washer
Bolt
position the rocking link
behind the rear stabilizer
the rear rocking
link bolt and washer
are now accessible
HOW TO... REPLACE THE ROCKING LINK ASSEMBLIES
Tools required: Phillips screwdriver, 13mm socket wrench
Estimated time required: 30 minutes
1. If the cross-trainer has line
cords, unplug them from the
wall outlets.
2. Remove and save the Phillips
screw that secures the
rocking link cover to the
rocking link.
3. Remove and save the bolt,
washer, and spacer that
secure the front of the
rocking link to the frame.
Note the orientation of each;
this will simplify reassembly.
4. Remove the rear pedal lever
clevis covers. (See the “How
To…” on page 47.)
5. Remove and save the bolt
and washer that secure the
pedal lever to the crankarm.
6. Carefully swing the rocker
assemblies back until the
mounting bolt at the rear of
the rocking link is accessible.
7. Remove and save the bolt
and washer that secure the
rocking link to the rocker
assembly.
8. Install the new rocking link in
reverse order using the
hardware removed and saved
in the previous steps.