Life Fitness Elevation 95X-ALLXX-01, Как использовать

Страница: 21 / 40

Elevation 95X-ALLXX-01 Commercial Cross-trainer
“How To…”
47
Rear Clevis Covers
(top and bottom)
Phillips
Screws (2)
Allen Bolt
Washer
Nut
Rocker Arm
Pedal Lever
Assembly
Washer
Pedal
Lever Bolt
Pedal Lever Assembly
Outside Crank Cover
HOW TO... REPLACE THE PEDAL LEVER ASSEMBLIES
Tools required: Phillips screwdriver, 6mm Allen wrench, 17mm and 19mm socket wrenches
Estimated time required: 45 minutes
1. If the cross-trainer has line cords,
unplug them from the wall
outlets.
2. Remove the front clevis covers.
(See the “How To…” on page 42.)
3. Remove and save the Allen bolt,
washers, and nut that secure the
pedal lever to the rocker arm.
4. Note the orientation of the thrust
washer and hardened washer on
either side of the pedal lever
shaft. This will simplify
reassembly.
5. Remove and save the shaft from
the old pedal lever.
6. Remove and save the two Phillips
screws that secure the rear clevis
covers to the pedal lever
assembly. Save the clevis covers.
7. Remove and save the bolt and
washer that secure the pedal
lever assembly to the crankarm.
8. Slide the pedal lever assembly off
the crankarm.
9. Remove and save the four bolts
that secure the pedal to the old
pedal lever assembly.
10. Attach the pedal and its
mounting screws to the new
pedal lever assembly.
11. Install the pedal lever assembly
in reverse order using the
hardware removed and saved in
the previous steps.