Life Fitness Elevation 95X-ALLXX-01, Как использовать

Страница: 19 / 40

Elevation 95X-ALLXX-01 Commercial Cross-trainer
“How To…”
45
Collar
Washers (2)
Bolts (2)
Snap
Ring
Needle
Bearing
Washers
Deadshaft
Deadshaft
Rocker Arm
HOW TO... REPLACE THE DEADSHAFT
Tools required: Phillips screwdriver, 5mm and 6mm Allen wrench, 13mm and 17mm socket wrenches, snap ring tool
Estimated time required: 45 minutes
1. If the cross-trainer has line cords,
unplug them from the wall
outlets.
2. Remove the deadshaft end cap
covers. (See the “How To…” on
page 32.)
3. Remove the media tray. (See the
“How To…” on page 31.)
4. Remove the console back cover.
(See the “How To…” on page 29.)
5. Remove the top deadshaft cover.
(See the “How To…” on page 33.)
6. Remove both handlebars. (See
the “How To…” on page 40.)
7. Remove both rocker arms. (See
the “How To…” on page 43.)
8. Remove and save the washers and
shaft collars on both sides of the
deadshaft.
9. Remove and save the bolts and
washers that secure the
deadshaft to the monocolumn.
10. Install the new deadshaft in
reverse order using hardware
removed and saved in steps 9 and
10.