background image

SAFE RIDING RULES

WARNING   Motorcycle riding requires special efforts on your part to ensure

safety.  Know these requirements before you ride.

Always make a pre-ride inspection before you start the engine. You may prevent

accident or equipment damage.

Most countries require a special motorcycle riding test or license. Make sure you are

qualified before you ride. NEVER lend your motorcycle to an inexperienced rider.
Make yourself conspicuous to help avoid the accident that wasn’t your fault:

Wear bright or reflective clothing.

Don’t ride in another motorist’s “blind spot”.
Don’t speedily cross another’s way.
Obey all national and local laws and regulations.

Obey the speed limits, and NEVER travel faster than conditions warrant.
Signal before you make a turn or lane change to draw other motorists’ attention.
Use extra caution at intersections, parking lot entrances and exits.

Always remember to ride with both hands and keep both feet on the rider footrest while
the passenger grasps the handrail with both feet on the rear footrest.

PROTECTIVE CLOTHS

For the safety sake, always wear a helmet, a face shield, dust glasses and protective

clothing. Your passenger needs the same protection.
 The exhaust system becomes hot during operation, and it remains hot for a while after
stopping the engine. Take care not to touch the exhaust system while it is hot. Wear
clothing that fully covers your legs.
Do not wear loose clothing that could catch on the control levers, wheels, etc.

REFITTING

WARNING  Arbitrarily refitting the motorcycle or removing the original parts

MOTORCYCLE SAFE RIDING

may make riding unsafe, and is illegal also. The user must obey all national and local
laws and regulations in relation to vehicle and traffic. If you have a good proposal
concerning refitting of the motorcycle, please write us. The refitment can be done with
permission of the Co. Otherwise, the user will take the consequences.

LOADING

WARNING   Addition of accessories and cargo may reduce the motorcycle’s

stability, performance and safe operating speed.

Keep cargo and accessory weight lower and close to the center of the motorcycle. Load
weight equally on both sides to minimize imbalance. As weight is located further from
the motorcycle’s center of gravity, handling is proportionally affected.
Adjust tyre pressure and rear suspension to suit load weight and riding conditions.
Make sure that cargo is fastened on the vehicle.
Do not attach items to the handlebars, fork or fender. Otherwise, unstable handling or
slow steering response may occur.
The maximum load weight of the motorcycle is 150kg. Please do not overload.

ACCESSORIES

Genuine accessories of LF Motors have been specifically designed and tested on the
motorcycle. Beacuse the factory cannot test all other accessories, you are personally re-
sponsible for selection, installation and use of accessories not produced by the Co. Al-
ways follow Safe Riding Rules and these below:

Carefully inspect the accessory to make sure that it does not obscure any lights, reduce

ground clearance or banking angle, or limit suspension travel, steering travel or con-
trol operation.

Do not add electrical equipment that will exceed the motorcycle’s electrical system

capacity.

LF 150-10B(ENGLISH)A.p65

2012-4-23, 9:33

4

Содержание LF 150-10B

























Отзывы: