Lifan LF 150-10B Скачать руководство пользователя страница 18

REAR BRAKE 

(Fig. 36)

Support the vehicle on its center stand. Measure the distance the rear brake pedal moves

before the brake starts to engage. The free play should be 20

30mm.

Apply the brake several times and check for free wheel rotation after the brake pedal is

released.

NOTE

 

There are no adjustments to be made to the brake. For any doubt, see your dealer

for help.

HOW TO USE BRAEK WEAR INDICATOR 

(Fig. 37 & 38)

If any pad is worn to its limit depth, replace both pads as a set at the first opportunity.

Rear brake pedal

~

Fig. 36

Fr. brake disk
Fr. brake caliper

Rr. brake disk
Rr. brake caliper

Wear limit

Wear limit

Fig. 37

Fig. 38

Tyre Pressure

Rider

Front tyre: 

Rear tyre: 

Rider & passenger

Front tyre: 

Rear tyre: 

Tyre size

Front tyre: 

Rear tyre: 

Tread Depth Limits

Front tyre

Rear tyre

FRONT/REAR SHOCK ABSORBER AND SUSPENSION

Support the motorcycle on the center stand, pull in the front brake lever to lock the front
wheel, pump the front/rear shock absorber up and down  several times to see that it func-
tions well without noise or leakage.
Check the rear fork bushing for proper play by  pressing the side of the rear wheel. Make
sure that all of the fasteners are tightened securely.

NOTE   

If the shock absorber is damaged, repair or replace it.

TYRE

Proper air pressure will provide maximum stability, riding comfort and porlong tyre life.

WARNING

  

Operation with excessively worn tyres is hazardous and will adversely

affect traction and handling.
NOTE   

 Tyre pressure should be checked before you ride while the tyres are “cold”. Check

the tyres for cuts, embedded nails, or other sharp objects. Check the rims for dents or
deformation. See your deler for change or damaged tyres or punctured inner tubes.

CAUTION   Improper tyre inflation will cause abnormal tread wear and create a
safety hazard. The tyre pressure less than the rated value may result in slipping wheel
on the ground or coming off from the rim.

When the tread depth in the middle section of tyres reached limits below, please replace
them.

LF 150-10B(ENGLISH)A.p65

2012-4-23, 9:33

18

Содержание LF 150-10B

























Отзывы: