Liebert Mini-Mate2 MCD24A Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 80

Liebert Mini-Mate2 MCD24A Скачать руководство пользователя страница 18

Optional Factory-Installed Features—Evaporator/Chilled Water Units

Liebert

®

Mini-Mate2

™

10

3.5

Free-Cooling

Free-cooling option includes separate cooling coil, three-way slow-close valve and separate supply and

return piping. Free-cooling is activated when the water temperature reaches a field-adjustable

temperature, typically 45°F (7°C). The valve is rated for 300psi (2068kPa) working pressure.
Air-cooled condensing units can be matched with evaporators using free-cooling coils with chilled

water sources to serve as backup cooling. When matched with a water/glycol condensing unit, a

three-way water regulating valve is recommended for the condensing unit to simplify piping to the

main supply pipes. The coil is designed for closed-loop applications using properly treated and

circulated fluid. Not available with SCR reheat options.

Figure 7

Free-cooling arrangement

3.6

Optional Configurations—Prop Fan Condensing Units

Outdoor Prop Fan Condensing Units

are also available in the following optional configurations:

• High ambient models for providing catalog capacities at ambient temperatures up to 105°F

(40°C).

• Quiet-Line models for low noise level conditions (below 56 dBA) and for providing catalog

capacities at ambient temperatures up to 95°F (35°C).

• Condenser coils can be phenolic-coated for extended coil life in coastal areas.

3.7

Optional Configurations—Water/Glycol Condensing Units

Indoor Water/Glycol Condensing Units

are also available with the following piping options:

• Two-way water reg. valve with 350 psi (2413kPa) design pressure.
• Three-way water reg. valve with 150psi (1034kPa) design pressure.
• Three-way water reg. valve with 350psi (2413kPa) design pressure.

3.8

Optional Configurations—Chilled Water Units

Chilled Water Units

are also available with the following valve option:

• Three-way, slow-close, motorized chilled water valve rated for 300 psi (2068 kPa) working

pressure. Valve is non-spring return.

NOTE

If free-cooling is applied to an open water tower, an optional copper-nickel (CuNi) coil is

required to prevent premature corrosion, or a heat exchanger must separate the tower water

from the free-cooling loop. The copper-nickel coil requires an extended lead time.

Free -
Cooling
Coil

Water/Glycol
Condenser

Field Piping

Water Temperature

Sensor

Liebert Mini-Mate2

Drycooler

Free-cooling option: A second

cooling coil allows the system to take

advantage of colder outdoor

temperatures and bypass compressor

operation.

When the water temperature goes

below 45°F (7°C), cooling switches

over to free-cooling operation. A

separate chilled water source can

also be used with air-cooled systems.

«
...
16
17
18
19
20
...
»

Содержание Mini-Mate2 MCD24A

















































































Отзывы:

Нет отзывов