LI-COR ODYSSEY Sa, Руководство оператора

Страница: 42 / 50

Chapter 5: Installing a BioTek® BioStack™ Plate Stacker
38) If you observe that the fixture will contact one or more of the pins as it is lowered, carefully
move the BioStack™ Plate Stacker in small increments until the fixture drops onto the surface of
the plate carrier without hitting any of the pins and binding.
Important: Move the BioStack Plate Stacker carefully and only in small increments. Excessive
movement can stress the plate gripper assembly, potentially causing damage.
39) Observe the bubble level on the fixture and make any necessary adjustments to level the BioStack
Plate Stacker.
40) Tighten the knob on both alignment pins. You may need to hold the threaded washer until the
knob begins to tighten.
41) Manually raise the BioStack plate gripper and remove the leveling and alignment fixture. Use the
fifth thumbscrew to secure the fixture to the BioStack stand for storage.
Page 42