LI-COR ODYSSEY Sa, Руководство оператора

Страница: 27 / 50

Odyssey® Sa Imager
If you cannot connect to the instrument, see Reset to Automatic IP Addressing on the next page.
The default administrator account shipped with the Odyssey Sa instrument is named “admin” and
the password is also “admin” (case sensitive). If you can log in using the default admin/admin
account, you are successfully connected and will be able to create new user (control) accounts.
For best security, change the password for the “admin” account and keep a record of the new
password in a safe place.
Adding Users
User account information is stored on the Odyssey Sa Imager rather than on the computer. If you
do not have a user account, you will need to create one.
8) Open the Application menu, hover over Instrument, hover over Management, and click Admin-
istration.
9) Click Manage Users to set up a new user account.
10) Close the System Administration window when you are through adding user accounts.
Setup is now complete.
Configuring Automatic IP Addressing
The Odyssey Sa Infrared Imaging System can be set to an automatic or manual IP address in the
Image Studio software in the System Administration window (see step 7 above). Click
Edit
Network Config...
Page 27