manualshive.com logo in svg

LGC wireless InterReach Fusion SingleStar, Инструкция по установке и эксплуатации, Страница: 122 / 154

Поделиться
Скачать
LGC wireless InterReach Fusion SingleStar Скачать руководство пользователя страница 122

Replacing a Fusion SingleStar Hub

7-2

InterReach Fusion SingleStar Installation, Operation, and Reference Manual

CONFIDENTIAL

D-x620605-0-20 Rev A

During System Test, the entire system is temporarily off-line and no RF is 
being transmitted. 

Checking the RAU’s LEDs

1.

The RAU’s 

LINK

 and 

ALARM

 LEDs should blink (green/red) on power up.

• If the LEDs do not blink on power up, replace the RAU.

2.

After several seconds both LEDs should change to green, which indicates that the 
unit has been successfully replaced, there is communication with the Hub, and the 
RAU band is correct.

a.

If the 

LINK

 LED remains green and the 

ALARM

 LED remains red, verify that 

the RAU model is correct for the intended frequency band.

– Disconnect the cable and then reconnect it once; doing this more than once 

will not change the result.

b.

If both LEDs still don’t change to green, use AdminBrowser to determine the 
exact nature of the fault and see a recommendation of how to correct it.

c.

If both LEDs turn red (after 90 seconds), the Hub has terminated communica-
tions.

7.2

Replacing a Fusion SingleStar Hub

You must record the system configuration settings from the old Fusion SingleStar 
Hub’s memory before replacing the unit. You will program the new Hub with this 
information. If the Hub is programmed incorrectly, the system will not work. If the 
Hub to be replaced is not functioning and you cannot use AdminBrowser, get the con-
figuration settings from the As-Built Document that was created as part of the origi-
nal installation.

Replacing a Fusion SingleStar Hub

1.

Using AdminBrowser, right-click on the Hub’s icon and select Get Parameters 
from the System Commands menu item.

The system’s configuration is displayed in the Messages pane.

2.

Turn off the power to the Fusion SingleStar Hub.

3.

Disconnect all cables and the AC power cord.

4.

Replace the Hub with a new one.

5.

Connect the AC power cord and all cables.

6.

Connect the crossover Ethernet cable to the PC and then to the Hub’s front panel 
100Base-T connector.

Содержание InterReach Fusion SingleStar



























































































































































Отзывы:

Нет отзывов