background image

Zentrale belüftet aufstellen. Die Zentrale erzeugt

Wärme. Zentrale vor Feuchtigkeit schützen.

Falls ein Kurzschluss auftritt sofort die Ursache

beseitigen.

Zentrale nie direkt an eine Netzsteckdose anschließen.

Vor dem Reinigen der Zentrale alle Anschlusskabel

entfernen.

Regelmäßig alle Komponenten des Mehrzugsystems

überprüfen. System nicht verwenden, wenn eine

Komponente beschädigt ist.

ACHTUNG!

 Dieses Produkt ist nicht für Kinder unter

8 Jahren geeignet. Bewahren Sie bitte Ihre Verpackung

und Bedienungsanleitung auf.

42

43

Install the Central Station in a ventilated space. The

Central Station generates heat. Protect the Central

Station from moisture.

If there is a short circuit, remove the cause immediately.

Do not connect the Central Station directly to house

current.

Before cleaning the Central Station, disconnect all

cables.

Check the components of the Multi-Train System

regularly. Do not use the system if any component is

damaged.

ATTENTION!

 This product is not for children under 8

years of age. Save the supplied packaging and

instructions.

Installer le poste central dans un endroit ventilé. Le

poste central génère de la chaleur. Protéger le poste

de l’humidité.

Éliminer immédiatement les causes des court-circuits.

Ne pas brancher le poste central directement dans

une prise de courant dans la maison.

Débrancher tous les câbles électriques avant de

nettoyer le poste central.

Vérifier régulièrement tous les éléments du système

multitrain. Ne pas utiliser le système si un élément

est endommagé.

ATTENTION  !

  Ce produit n’est pas pour les enfants

en-dessous de 8 ans. Conserver l’emballage et les

instructions.

© DiskArt™ 1988

Содержание 55005



























Отзывы: