LGB 20585, Руководство пользователя

Страница: 10 / 32

10
SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a small amount of Märklin-
Oil (7149).
Replacing Traction Tires
- Loosen two screws on the side frame of the truck and remove the side frames.
- Remove the old traction tire with a small flat screwdriver:
Lift the old traction tire out of the groove in the driving wheel.
- Carefully push the new traction tire over the wheel and into the groove on the wheel.
- Check to make sure that the traction tire is properly seated.
- Put the model back together.
Cleaning
Clean the locomotive only with a soft cloth. Do not use any cleaning agents or abra-
sive cleaners.
General Note to Avoid Electromagnetic Interference:
A permanent, flawless wheel-rail contact is required in order to guarantee operation
for which a model is designed. Do not make any changes to current-conducting parts.
Controllable Functions
Lighting
1
LV + LR
Sound effect: Long Horn 1 Sound 1
Sound effect: Squealing brakes off 2 BS
Sound effect: Short Horn 3 Sound 2
Sound: Greeting announcement 4 Sound 7 / 8
Sound effect: Compressor 5 Sound 11
Sound effect: Operating sounds
1, 2
6 FS
Sound effect: Bell 7 Sound 3
Sound on/off 8
ABV, off 9
Sound effect: Horn sequence before a grade crossing 10 Sound 15
Third headlight 11
Marslight 12 AUX 1
Long distance headlights 13 AUX 6
Sound effect: Sanding 14 Sound 17
Engineer‘s cab lighting 15 AUX 2
Sound effect: Announcement 16 Sound 5
Sound effect: Announcement 17 Sound 6
Sound effect: Station announcements 18 Sound 20
Sound effect: Announcement 19 Sound 4
Sound effect: 4 x Short Horn 20 Sound 16
Sound effect: Letting off air 21 Sound 14
Sound effect: Rail joints 22 Sound 19
Sound effect: Coupling together 23 Sound 18
1
active in analog operation
2
with random sounds