manualshive.com logo in svg

LG Therma V ZHBW056A0, Руководство по обслуживанию, Страница: 38 / 115

Поделиться
Скачать
LG Therma V ZHBW056A0 Скачать руководство пользователя страница 38

- 38 -

Copyright © 2018 LG Electronics Inc. All rights reserved.
Only training and service purposes.

• Duplicated trouble : Option trouble with slight or heavy trouble

If option trouble is occurred with slight (or heavy) trouble at the same time, the system puts higher priority to
slight (or heavy) trouble and operates as if slight (or heavy) trouble is occurred.
Therefore, sometimes DHW heating can be impossible in emergency operation mode. When DHW is not warm-
ing up while emergency operation, please check whether the DHW sensor and related wiring are connected well
or not.

• Emergency operation is not automatically restarted after main electricity power is reset.

In normal condition, the unit operating information is restored and automatically restarted after main electricity
power is reset.
But in emergency operation, automatic re-start is prohibited to protect the unit.
Therefore, user must restart the unit after power reset when emergency operation has been running.

3.2 Service setting

How to enter service setting

To enter the menu displayed at the bottom, you need to enter the service setting menu as follows.

• In the menu screen, press [<,>(left/right)] button to select the setting category, and press [OK] button to move to

the setting list.

• In the setting list, select the service setting category, and press [OK] button to move to the service setting list.

Service setting

• You can set the product service functions.

• Some functions may not be displayed/operated in some product types.

OK

Menu

Description

Service contact 

Check and input the service center phone number that you can call
when there is service issue.

Model information

view the Indoor / outdoor product group and capacity information 

RMC Version Information

Check the remote controller model name and software version.

Open Source License

View the remote controller’s open source license.

Содержание Therma V ZHBW056A0




















































































































Отзывы:

Нет отзывов