
PRODUCT DATA
|
21
HEA
T PUMP
CONDENSING UNIT ENGINEERING MANUAL
Due to our policy of continuous product innovation, some specifications may change without notification.
© LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
GENERAL DATA
Communication Cables & Specialty Application Devices
Table 7: Summary Data—Zone Controller Communication Cables
Communication Cable
Name
Model No.
Wire
Length (ft)
Description
Wired Remote Group
Control Cable Assembly
PZCWRCG3
32
Required when grouping multiple indoor units with a single
zone controller.
Wired Remote/Group Control
Extension Cable
PZCWRC1
32
Increases the distance between a remote controller and an
indoor unit or between indoor units in a control group.
Table 8: Summary Data—Speciality Application Devices
Speciality Application
Device
Name
Model No.
Connect
to
Application
Binary
Signals
Input/
Output
Description
Dry Contact Unit 24 VAC
PQDSB1
Indoor
Unit
On/Off, Run Status,
Error Status
1/2
Enables the indoor unit to be
controlled and monitored by third
party controls using binary inputs
and outputs.
Dry Contact Unit for
Communication
PQDSBCGCD0
On/Off, Mode,
Controller Lock, Power
Save,Run Status,
Error Status
2/2
Dry Contact Unit for
Thermostat
PQDSBNGCM1
On/Off, Thermo On/
Off, Mode,Fan Speed,
Run Status,
Error Status
---
Enables the indoor unit to be
controlled and monitored by a
third party thermostat or
controller.
Digital Output (DO) Kit
PQNFP00T0
Comm
Bus
On/Off
0/1
One 25 amp DPST normally
open relay. Used with central
controller to control third party
device manually or by schedule.
Auxiliary Heater Relay Kit
PRARH0
Indoor
Unit
3rd party
supplemental heat
control
0/1
Adds coordinated control of an
external heater with normal heat
pump operations. Contact
energizes at 2.7°F below
setpoint. De-energizes at 2.7°F
above setpoint.
PRARS0
Power Distribution
Indicator (PDI)
PQNUD1S01
Comm
Bus
Energy
consumption
monitoring
---
Monitors total outdoor unit power
consumption and distributes
per indoor unit based on weighted
calculation.
Mode Selector Switch
PRDSBM
Outdoor
Unit
Multi V Heat
Pump Only
---
Locks outdoor unit into Heat,
Cool, or Fan Mode.
Before specifying or placing an order, refer to the V-Net Network Solution Engineering Product Data Book and review the detailed technical data provided to fully understand the capabilities and limitations of
these devices.
For information on controller compatibility refer to Table 11 - Indoor Unit Controls and Options.
Before specifying or placing an order, refer to the V-Net Network Solution Engineering Product Data Book and review the detailed technical data provided to fully understand the capabilities and limitations of these
devices.
For information on controller compatibility refer to Table 11 - Indoor Unit Controls and Options.
Содержание Multi V mini
Страница 8: ......