LG Multi V ABRUV100LTS4 Скачать руководство пользователя | Manualshive

Страница: 4 / 87

background image

• When installing and moving the air conditioner to another site, do not charge it with a

different refrigerant from the refrigerant specified on the unit.
- If a different refrigerant or air is mixed with the original refrigerant, the refrigerant cycle may mal-

function and the unit may be damaged.

• Do not reconstruct to change the settings of the protection devices.

- If the pressure switch, thermal switch, or other protection device is shorted and operated forcibly,

or parts other than those specified by LGE are used, fire or explosion may result.

• Ventilate before operating air conditioner when gas leaked out.

- It may cause explosion, fire, and burn.

• Securely install the cover of control box and the panel.

- If the cover and panel are not installed securely, dust or water may enter the outdoor unit and fire

or electric shock may result.

• If the air conditioner is installed in a small room, measures must be taken to prevent the refrigerant

concentration from exceeding the safety limit when the refrigerant leaks.
- Consult the dealer regarding the appropriate measures to prevent the safety limit from being ex-

ceeded. Should the refrigerant leak and cause the safety limit to be exceeded, harzards due to lack
of oxygen in the room could result.

Operation

• Do not damage or use an unspecified power cord.

- There is risk of fire, electric shock, explosion, or injury.

• Use a dedicated outlet for this appliance.

- There is risk of fire or electrical shock.

• Be cautious that water could not enter the product.

- There is risk of fire, electric shock, or product damage.

• Do not touch the power switch with wet hands.

- There is risk of fire, electric shock, explosion, or injury.

• When the product is soaked (flooded or submerged), contact an Authorized Service Center.

- There is risk of fire or electric shock.

• Be cautious not to touch the sharp edges when installing.

- It may cause injury.

• Take care to ensure that nobody could step on or fall onto the outdoor unit.

- This could result in personal injury and product damage.

• Do not open the inlet grille of the product during operation. (Do not touch the electrostatic filter, if the unit is so

equipped.)
- There is risk of physical injury, electric shock, or product failure.

IMPORTANT SAFETY INSTRUCTIONS

4

ENGLISH

«
...
2
3
4
5
6
...
»

Содержание Multi V ABRUV100LTS4
























































































Отзывы:

Нет отзывов

Похожие инструкции для Multi V ABRUV100LTS4

Air Boss T1001 Module

Бренд: Trion Страницы: 22

MPS2-10CRN1-BH9

Бренд: Uberhaus Страницы: 24

Бренд: Carrier Страницы: 44

CoolAir CA-1000-AC

Бренд: Waeco Страницы: 220

Бренд: EdgeStar Страницы: 14

Бренд: Daikin Страницы: 44

Бренд: Daikin Страницы: 17

Бренд: Cryo's Страницы: 16

Бренд: AERMEC Страницы: 12

Бренд: PUR Страницы: 10

Бренд: Purified Air Страницы: 58

Бренд: Lennox Страницы: 14

IBIS ROOFTOP CARAVAN

Бренд: Aircommand Страницы: 42

Бренд: REMKO Страницы: 36

Бренд: Kooltronic Страницы: 13

Бренд: Mitsubishi Страницы: 128

Бренд: Panasonic Страницы: 95

Бренд: Panasonic Страницы: 117

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды