LG Multi V ABRUV100LTS4 Скачать руководство пользователя

Страница: 6 / 87

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• Safely dispose of the packing materials.

- Packing materials, such as nails and other metal or wooden parts, may cause stabs or other injuries.
- Tear apart and throw away plastic packaging bags so that children may not play with them. If children play with a

plastic bag which was not torn apart, they face the risk of suffocation.

• Turn on the power at least 6 hours before starting operation.

- Starting operation immediately after turning on the main power switch can result in severe damage to internal

parts. Keep the power switch turned on during the operational season.

• Do not touch any of the refrigerant piping during and after operation.

- It can cause a burn or frostbite.

• Do not operate the air conditioner with the panels or guards removed.

- Rotating, hot, or high-voltage parts can cause injuries.

• Do not directly turn off the main power switch after stopping operation.

- Wait at least 5 minutes before turning off the main power switch. Otherwise it may result in water leakage or

Содержание Multi V ABRUV100LTS4
























































































Результаты поиска

Содержание Multi V ABRUV100LTS4

Отзывы:

Похожие инструкции для Multi V ABRUV100LTS4

Бренды по названию

Популярные бренды

LG Multi V ABRUV100LTS4, Руководство по установке

Результаты поиска

Содержание Multi V ABRUV100LTS4

Отзывы:

Похожие инструкции для Multi V ABRUV100LTS4

Бренды по названию

Популярные бренды