3. DISASSEMBLY
3-1 DOOR
FREEZER DOOR
- 7 -
1. Using the Phillips screwdriver, loose the screw from the top-
hinge cover (a) after this remove it with a flat head screwdriver
(b) (See Fig. 6).
2. Using either a 10 mm or 13/32 in. socket wrench, remove
the three bolts and lift off the top hinge. Set parts aside (See
Fig. 7).
3. Carefully lift up the freezer door. Place the door on a non-
scratching surface. (See Fig.8)
Figure 6
(a)
(b)
Screw
Figure 7
Figure 8
REFRIGERATOR DOOR
1. Loosen and remove the two bolts using the socket wrench
(See Figure 9).
2. Remove the middle hinge bracket (See Figure 10).
3. Carefully lift up the door. Place the door on a non-
scratching surface (See Figure 11).
Figure 9
Middle Hinge
Bracket
Figure 10
Figure 11
3-2 DOOR SWITCH
1. To remove the door switch, remove it with a screwdriver as
shown Figure 12.
2. Disconnect the lead wire from the switch.
Figure 12
3-3. HANDLE DISASSEMBLY
1. Remove the handle deco using a screwdriver to pull it out.
2. With a star screwdriver, remove the screws that holding the
handle with door.
3. Remove the handle, pulling it out for disassembly.
Содержание LTN16385PL
Страница 28: ... 28 ...
Страница 32: ...1 Main PCB CON3 CON2 CON4 CON1 2 LED Assembly 32 8 2 1 Components ...
Страница 55: ...May 2012 MFL49380026 ...