2-3
USING YOUR RANGE
Setting Surface Controls
1. Cooking Element LED Bar
The range provides an LED bar for each cooking
element on the cooktop. Check messages in the
display window and use the LEDs with the
corresponding control knobs to monitor the power
levels of the elements.
2. Available Power Level Settings
The cooktop control’s LED bar displays the
element’s power level settings, ranging from Lo to
Hi to Boost. Adjust the settings in increments of
one, from Lo (Level 1) to Boost (Level 10).
To select Hi, turn the knob clockwise, through
level 8 to Hi/Boost.
3. Boost Power Level
To activate the Boost mode, turn the knob directly
from Off to Boost. Boost mode is only available
immediately after activating a cooking element.
When the cooking element is set to the Boost
mode, the LED bar flashes and the Boost mode
stays in operation for up to 10 minutes. After 10
minutes, the cooking element automatically
returns to the Hi setting.
Turning On a Cooking Element
1. Push the control knob in.
2. Turn the knob in either direction to select the
desired setting. A short beep sounds and the
cooking element’s LED bar shows its current
setting.
Using the Cooking Elements
Lo
Simmer
3
4
MED
6
7
8
HI
Boost
Simmer
HI/Boost
Simmer
HI/Boost
3
Simmer
HI/Boost
Simmer
HI/Boost
3
CAUTION
Before Cooking
• Do not place or store flammable or heatsensitive
items on the induction cooktop, even when the
cooktop is not in use.
• Place cookware on the cooking elements before
turning on the induction cooktop.
• Do not place sealed containers on the cooktop.
During Cooking
• Do not place metallic objects such as knives, forks,
spoons, and lids on the induction cooktop surface;
they can get hot.
• Use this appliance only for normal household use. It
is not designed for commercial or industrial use.
• Never use the appliance to heat the room.
• Use caution when plugging electrical appliances into
power outlets near the cooktop. Keep power cords
from any contact with the cooktop or cookware.
• Overheated fat and oil can catch fire quickly.
Never leave surface elements unattended when
frying foods.
• Do not use the induction cooktop to heat aluminum
foil, products wrapped in aluminum foil , or frozen
foods packaged in aluminum cookware.
• Use caution when plugging electrical appliances into
outlets near the cooktop to keep power cords away
from the hot cooktop or cookware.
• Users with pacemakers and active heart implants
must keep their upper body at a minimum distance
of 1 ft (30 cm) from active induction cooking
elements. If in doubt, consult the implant
manufacturer or your doctor.
After Cooking
• After use, switch off the induction cooking element
using its control. Do not rely on the pan sensor.
3. To activate the Boost mode, turn the knob directly
from Off to Boost.
Содержание LSE4617ST
