LG LRA3040N-NH, Руководство пользователя

Страница: 3 / 47

Safety Information 3
1
Safet
y Information
• Do not install the system in a place with high magnetic, electric
wave, or wireless devices such as a radio or a TV.
- Do not install the system in a place with magnetic objects,
electric frequencies, or vibration.
• Do not place any heavy object on the system.
- This may cause system breakdown.
• Install the system on a stable, level surface.
- The system may not operate properly.
• Install the system in a place with appropriate moisture and
temperature levels.
- Avoid installing the system in a place with high (over 40 °C) or
low (under 0 °C) temperature.
• The system can be damaged from a strong impact or vibration.
Avoid throwing objects within the vicinity of the system.
• Avoid direct sunlight or any heating appliances.
- Recommended operating temperature is over 0 °C (32 °F).
• Ventilate the air inside the system operation room, and tighten
the system cover firmly.
- System breakdown may be caused by an inappropriate
environment. It is recommended to use AVR (Automatic
Voltage Regulator) for a stable power supply. It is
recommended to coil the core-ferrite around the connector of
the system to avoid electromagnetic interference.
• The outlet must be placed on the ground.
• If there are any problems or a strange noise and smell, unplug the
power cable immediately and contact the service center.
- This may cause fire or electric shock.
• In order to maintain stable system performance, have your system
checked regularly by the service center.
- LG Electronics is not held responsible for system breakdown
caused by user mishandling.
- There is a risk of explosion if a battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.
• Use the mouse which is supplied from this unit.
- Otherwise, the system may not operate properly.
• Do not connect more than 3 ea of PoE+ IP camera at once. (Up 9
to 2 ea available)
-
The system may not operate properly.
• Do not overturn the product during use.
• The attached power adapter can only be used for 1 set of DVR. Do
not connect more equipment, or DVR may be restarted repeatedly
because of insufficient power.
• Do not use strong solvents such as alcohol, benzine or thinner as
these might damage the surface of the unit.
• Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon.
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.