28
Installation
3
Install
ation
•
Email: Select [Enable] or [Disable].
•
SSL: Select [Enable] or [Disable].
•
SMTP Port: Enter the SMTP port number. It recommend to change
this port number for added flexibility or security.
•
SMTP Server: Enter the SMTP server address.
•
Sender: Enter the E-mail address of Sender.
•
Sender Password: Enter the Sender Password.
•
Receiver: Enter the E-mail address of Receiver.
•
Interval: Select a interval.
• Test Email: Select [Test Email] to check sent mail.
Save:
Click [Save] button to confirm the settings.
Note
SMTP Port, SMTP server, sender, or password settings are optional.
This unit can send an E-mail without using SMTP server or the
MTA (Message Transfer Agent). If you send an E-mail to a specific
SMTP server, you have to specify the server host name or IP
address. Inquire of the network service providers or the network
administrator about SMTP setting.
Email Schedule
•
Channel:
1. Select the channel you want.
2. Select the mode [Motion Detection / Exception]
3. Drag and drop with left button of the mouse to set the time
you want to record.
Note
• E-mail schedule can be set by the week.
•
Green: It send E-mail when detected motion.
Red: Mail will be sent, when the below situation,
such as lack of capacity, damage and loss of the
recorded files on hard disk occurs.
•
Copy: Copy a particular channel settings to another channel or all
channels.
Save:
Click [Save] button to confirm the settings.
Содержание LRA3040N-NH
Страница 47: ......
