LG LDG4313ST страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 93

background image

This LG Service Manual, “ 30” Freestanding Self-Cleaning Gas double oven range,” provides
the technician with information on the operation and service of the Freestanding Self-Cleaning
Gas Range. It is to be used as a training Service Manual. For specific information on the model
being serviced, refer to the “Owner’s Manual” or “Tech Sheet” provided with the gas range.

SAFETY PRECAUTIONS

• Repairs of the appliance should be carried out by a licensed technician only. Incorrect repairs

may result in dangerous situations. If you need repairs, contact an LG Service Center or your
dealer.

• If the power cord is defective, it must be replaced by a qualified service agent with a UL/CSA

listed range cord.

• Electrical leads and cables should not be allowed to touch the oven.

• Rating plate is located on the lower door right side.

• The power supply of the appliance should be turned off when it is being repaired.

FORWARD

LG Electronics assumes no responsibility for any repairs made
on our products by anyone other than Authorized Service Technicians.

WARNING

• DISCONNECT power supply cord from the outlet before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.

- Failure to do so can result in severe personal injury, death or electrical shock.

• DO NOT touch the oven when it is in operation.

- The interior parts will be very hot.

WARNING

If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury or death. If you
smell gas:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the

gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

«
1
2
3
4
...
»

Содержание LDG4313ST






























































































Отзывы:

Нет отзывов

Похожие инструкции для LDG4313ST

Бренд: Galaxy Страницы: 16

Бренд: Bosch Страницы: 44

Бренд: Bosch Страницы: 2

Бренд: Bosch Страницы: 20

Бренд: Bosch Страницы: 20

Бренд: Bosch Страницы: 40

Бренд: Bosch Страницы: 36

Бренд: Bosch Страницы: 52

Бренд: Bosch Страницы: 84

Бренд: Bosch Страницы: 72

Бренд: Bosch Страницы: 124

Бренд: Maytag Страницы: 20

Бренд: Whirlpool Страницы: 20

Бренд: Whirlpool Страницы: 24

Бренд: Whirlpool Страницы: 32

Бренд: Whirlpool Страницы: 31

Бренд: Whirlpool Страницы: 36

Бренд: Whirlpool Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды