2-3
USING YOUR RANGE
1. TO TURN ON THE SURFACE BURNER
1. Be sure all the surface burners are placed in
their respective positions.
2. Push the control knob in and turn it to the
“LITE” positions.
3. You can hear a little CLICKING noise - the
sound of the electric spark igniting the burners.
4. To control the flame size, turn the knob. If the
knob stays at “LITE”, it will continue to click.
NOTE:
• When turning a burner to LITE, all the burners spark. Do
not attempt to disassemble or clean around any burner
while another burner is on. An electric shock may result,
which could cause you to knock over hot cookware.
• The medium (left rear) and the large (left front) burners are
the primary burners for most cooking. These general-
purpose burners can be turned down from “HI” to “LO” suit
a wide range of cooking needs.
• The extra large burner (right front) is the maximum output
burner. Like the other four burners, it can be turned down
from “HI” to “LO” for a wide range of cooking applications.
• The extra large burner can be also turned down to “LO” for
a low simmer setting almost like the small burner.
2. SETTING THE CLOCK
3. START, CLEAR/OFF
1. Touch START to start oven
2. Touch Start to cancel a program during
cooking or Erase during programming.
4. TO TURN ON/OFF THE OVEN LIGHT
The interior oven light automatically turns on when
the door is opened. Touch Light to manually turn the
oven light on.
NOTE:
The oven light cannot be turned on if self-clean
feature is active.
5. TIMER ON/OFF
(For Upper & Lower oven)
To cancel timer at any time, touch TIMER ON/OFF.
NOTE:
1. If you touch TIMER ON/OFF once, this allows you to
select “seconds”
(for example: if you touch “5” and “6”, it means 56
seconds)
2. If you touch TIMER ON/OFF twice, this allows you to
select “minutes”
(for example: if you touch “5” and “6”, it means 56
minutes)
6. SETTING : (6 types of category).
1) Setting the Hour Mode.
1. Touch Settings once.
2. Touch 1 to toggle between a 12-hour and
24-hour clock.
3. Touch Start to accept the change.
2) Setting the Convection Auto Conversion
(LowerOven).
1. Touch Settings repeatedly until. Auto
appears in the display.
2. Touch 1 to disable or enable auto
conversion.
3. Touch Start to accept the change.
3) Adjusting the Oven Thermostat
The oven temperature can be adjusted from
-35°F (-19°C) to 35°F (19°C).
NOTE:
This adjustment does not affect the broiling or
Self Clean temperatures. The adjustment is
retained in memory after a power failure.
1. Touch Settings repeatedly until L_AJ or
U_AJ appears in the display.
2. Use the number keys to enter the number
of degrees you want to adjust the oven
thermostat.
3. Adjust the thermostat either up or down by
touching Settings repeatedly to toggle
between plus (+) or minus (-).
4. Touch Start to accept the change.
4) Turning the Preheat Alarm Light On/Off
1. Touch Settings repeatedly until PrE appears
in the display.
2. Touch 1 to turn the light on/off.
3. Touch Start to accept the change.
CLEAR
/OFF
CLOCK
Desired
Time
START
UPPER
TIMER ON/OFF
LOWER
TIMER ON/OFF
Inputting
Desired time
or
or
UPPER
TIMER ON/OFF
LOWER
TIMER ON/OFF
Содержание LDG4313ST
Страница 50: ...6 1 COMPOSITION OF CONTROL 1 Wiring Diagram Main system PCB ...
Страница 53: ...6 4 COMPOSITION OF CONTROL NFC PCB NFC PCB P N EBR78789101 Buzzer PCB Buzzer PCB EBR76332902 ...
Страница 89: ...2034 2050 203L 203R 2051 2006 2501 260M 2001 260B 2381 260K 2043 2042 2044 2385 CONTROLLER PARTS EV ...
Страница 93: ......