3-9
COMPONENT ACCESS
REMOVING THE DOOR LA
REMOVING THE DOOR LA
TCH & LOWER DOOR SWITCH
TCH & LOWER DOOR SWITCH
(For the Lower oven only)
(For the Lower oven only)
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the
range.
- Some parts may have sharp edges, which
could result in injury.
1. Turn off the electrical supply and gas supply
going to the range.
2. Remove the Upper & Lower door.
(See pages 3-19, 3-20 for the procedure)
3. Remove the manifold, cooktop and the case
assembly (see page 3-5 for the procedure)
4. Remove the Side panels.
(See page 3-26 for the procedure.)
5. To remove the Lower door latch.
a) Remove 4 screws to detach 2 hinge
supporters of Upper oven
b) Remove 2 screws to widen the space between
Upper & Lower cavities. After that remove the
hinge bracket.
c) Tilt the Upper cavity cautiously, make sure that
the controller does not fall down the floor.
d) Remove 2 screws to replace the lower latch.
f) Pull out the Lower latch from the bar.
2 screws
Unhook
Actuating
Rod
2 screws
4 screws
Содержание LDG4313ST
Страница 50: ...6 1 COMPOSITION OF CONTROL 1 Wiring Diagram Main system PCB ...
Страница 53: ...6 4 COMPOSITION OF CONTROL NFC PCB NFC PCB P N EBR78789101 Buzzer PCB Buzzer PCB EBR76332902 ...
Страница 89: ...2034 2050 203L 203R 2051 2006 2501 260M 2001 260B 2381 260K 2043 2042 2044 2385 CONTROLLER PARTS EV ...
Страница 93: ......