GB-21
EX
TERNAL EQUIP
MENT SE
TUP
VCR SETUP
To
avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF Cable
➊
Connect the
ANT OUT
socket of the VCR to the
ANTENNA IN
socket on the TV.
➋
Connect the terrestrial antenna cable to the
ANT IN
socket of the VCR.
➌
Press the
PLAy
button on the VCR and match the appropriate channel between the TV and VCR for viewing.
Connecting with a RCA Cable
➊
Connect the
AUDIO/VIDEO
jacks between TV and VCR. Match the jack colours
(Video = yellow, Audio Left = white, and Audio Right = red)
➋
Insert a video tape into the VCR and press
PLAy
on the VCR. (Refer to the VCR
owner’s manual.)
➌
Select
AV2
input source using the
INPUT
button on the remote control.
NOTE
If you have a mono VCR, connect the audio cable from the VCR to the
AUDIO
L/MONO
jack of the TV.
►
AV IN 2
L/
MO
NO
R
AUDIO
VIDEO
USB IN
H/P
IN4
➊
Terrestrial
Wall jack
Terrestrial Antenna
➊
➋