82
Recognition Fail Case 1:
CD-ROM Fail
Check Pickup Read Power
was 1.3 ~1.7mW?
Check the Pick-up FFC and CN101.
Replace the Pick-up.
Go to “Focus Servo is unstable”.
NO
YES
Does Focus Servo
operate normally?
Check Pickup
RF signal IC121(Pin81)
RFOUT was 2~2.5V?
NO
Go to “LD CHECK”.
YES
NO
Replace IC121.
YES
Check EQOUTP
waveform (IC121 Pin 74) was
1.75~2.3V?
NO
Go to “Tracking Servo is unstable”.
YES
YES
Check after replacing IC201.
It is OK?
NO
Recognition Fail Case2 :
Blank CD-R/RW
Is there WBL (IC201 pin39)
signal?
Check the connection between
IC201 and IC121.
Replace IC121.
Replace the IC201.
NO
YES
Is there WBL (IC121 pin63)
signal?
NO
YES
OK
Содержание GSA-4166B
Страница 18: ...2 2 Pick up A Release 1 screw C and remove the Pick up Pick up Unit Pick up C Fig 2 2 18 ...
Страница 39: ...43 3 MD Assy For LightScribe Optical Encoder Unit OPU ID Movement Range L 21um ...
Страница 86: ...90 CD Laser Power Setup Result HC_CD Laser Power Setup Result DVD Laser Power Setup Result ...