LG GDL1329CED3, Руководство по обслуживанию

Страница: 34 / 79

34
7
ELECTRICAL REQUIREMENTS FOR GAS DRYERS
120 Volt, 60 Hertz, with 3-Prong Grounding Plug
Electrical Requirements for Your Dryer:
STANDARD 120 VOLT, 60 HERTZ, 3-WIRE
EFFECTIVELY GROUNDED CIRCUIT
1 L1
2 Ground
3 Neutral Side
4 Grounding Prong
5 Neutral
Following are additional instructions regarding electrical connections and requirements for gas dryers.
WARNING: The wiring and grounding must conform to the latest edition of the National
Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1, and all applicable
local regulations. Please contact a qualified electrician to check your home’s wiring and fuses to
ensure that your home has adequate electrical power to operate the dryer.
Failure to do so can
result in fire or electric shock.
a) Please note that the wiring diagram is provided inside
the dryer control hood. Label all wires prior to
disconnection when servicing the dryer, because wiring
errors can cause serious injury to you and your dryer.
b) Your dryer is designed to be used on a separate branch,
polarized, three-wire, effectively grounded, 120 Volt,
60 Hertz, AC (alternating current) circuit protected by a
15 Ampere fuse, equivalent fuse or circuit breaker.
c) Use separately fused circuits for washers and dryers,
and DO NOT operate a washer and a dryer on the same
circuit.
a) The dryer has a three-prong plug to help guard against
shock. The plug should be plugged directed into a
properly grounded three-prong receptacle that is rated
120 Volts AC (alternating current) 15 Amps. This plug,
in order to be properly and fully effective, must be
plugged into a properly installed outlet that is grounded
in accordance with all local codes and ordinances.
b) The dryer must be grounded in order to reduce the risk
of electric shock, including a
malfunction or breakdown.
c) If your laundry room does not meet the specifications
required by this manual, or if you are uncertain whether
or not your laundry room meets these specifications,
please have a qualified service person or company.
Review your laundry room’s electrical supply for any
problems.
WARNING
•
Do not overload the circuit by operating
other appliances on the same circuit
when this appliance is operating, by
using an extension cord to connect the
dryer to the power source, or by using
any adapter to allow additional cords to
connect to the same outlet.
•
Failure to do so can result in fire or
electric shock.
WARNING
•
Do not modify the plug provided with
the dryer. If it does not fit the outlet in
your laundry room, a proper outlet will
need to be installed in your laundry
room by a qualified service person or
company.
•
Failure to do so can result in fire or
electric shock.