LG GDK-100, Руководство пользователя

Страница: 145 / 180

GDK-100
DIGITAL KEY TELEPHONE SYSTEM
136
4.2 Station/CO Line Number Assignments
1) As same as any other station/CO cards, the station/CO line number on ISDN card is assigned by
ADMIN 02 in Admin. Programming.
2) In PRIB, the 30 continuous CO line numbers are assigned by ADMIN 02.
3) In BRIB, the 8 continuous CO line numbers are assigned by ADMIN 02. Two continuous CO line
numbers are assigned per each port (2B+D).
4) In STIB with all T-Interfaces, as same as BRIB, the 8 continuous CO line numbers are assigned by
ADMIN 02. Two continuous CO line numbers are assigned per each port (2B+D).
5) In STIB with all S-Interfaces, the 8 continuous station numbers are assigned by ADMIN 02. Two
continuous station numbers are assigned per each port (2B+D).
6) If STIB is used for both S-Interface and T-interface, then system assigns the continuous CO line
number on each T-Interface, and the continuous station number on each S-Interface, as follows;
( If the first Sta. No. is 120 and the first CO No. is 24)
Port 1 S-Interface Station 120-121
STIB Board Port 2 T-Interface CO line 24-25
Port 3 S-Interface Station 122-123
Port 4 T-Interface CO line 26-27
7) Two continuous station numbers are assigned to a single S-Interface act as the same station
number. For example, calling to Station 120 is the same to calling to Station 121.
8) If you want to change S-Interface to T-Interface, or vise versa on the STIB board, you have to re-
program Slot Assignment (ADMIN 02) even if the Slot Assignment is not changed and reset the
GDK system. After that, system works as required.
9) In STIB,
To use 'T' interface only - Slot Assignment (PGM 02) at COL only
To use 'T' & 'S' interface - Slot Assignment (PGM 02) at COL & STA
To use 'S' interface only - Slot Assignment (PGM 02) at COL & STA