More...
Airplane
mode
ON/OFF this terminal's
emission of radio waves.
File
networking
Set whether to share a folder in
this terminal with another device
via a wireless connection.
Tethering
Configure the Wi-Fi access
point settings. (P124)
Wi-Fi Direct
Directly connect to a device
supporting Wi-Fi Direct without
going through access points.
Miracast
Set to share the displayed
contents and sound with a
Miracast-compatible device
using Wi-Fi Direct.
VPN
Set to communicate with
VPN (virtual private network).
(P125)
Mobile
networks
Set an access point and
configure the data roaming and
network mode settings.
Note
• If you tap "Search networks" while using
data communication over a LTE network,
the message, "Please disable data
access and retry later." appears.
• If you tap "Search networks" while
using data communication over a 3G
network, the message, "Cannot search
for available networks while data access
is enabled. Are you sure you want to
disable data access and search for
available networks?" appears. Tap "OK" to
stop data communication and search for
networks.
• When using Miracast, the terminal cannot
connect any other network than the Wi-Fi
network used for Miracast.
Data usage
You can display mobile communication
data amount (rough indication) by term and
application.
From the Home screen,
X
"Settings"
X
"Data usage"
123
Settings