21
206-4157
PCS150R Configuration Options (Cont.)
(Continued from previous page)
3. To return to the
Command >
prompt without making any changes, you can simply press
Enter
. Otherwise, select the appropriate option, depending on the parameter you wish to
change:
• Program Number: Type
1
and press
Enter
to change the video program number.
At the
Enter new value for Program number [47]:
prompt, type a new program
number and press
Enter
. The system will redisplay the video configuration, showing your
update.
Note:
The video channel major number is the RF data channel assigned for Pro:Centric
operation (Installer Menu item 119 DATA CHANNEL) and the video channel minor
(program) number is as configured in this step (default program number = 47). Refer to
Commercial Mode Setup documentation for the TV in question for further information.
• PMT ID: Type
2
and press
Enter
to change the PMT (Program Map Table) PID (packet
ID).
At the
Enter new value for PMT PID [4096]:
prompt, type the new PMT ID and
press
Enter
. The system will redisplay the video configuration, showing your update.
• Video PID: Type
3
and press
Enter
to change the video PID.
At the
Enter new value for Video PID [4097]:
prompt, type the new video PID
and press
Enter
. The system will redisplay the video configuration, showing your update.
Note:
Assign video and elementary PIDS as necessary according to the system’s
network distribution requirements.
• Elementary PID: There are four Elementary PIDs. Type
4
,
5
,
6
, or
7
, depending on which
Elementary PID you wish to change, and press
Enter
.
At the
Enter new value for Elementary PID
#
[]:
prompt, type the new
Elementary PID and press
Enter
. The system will redisplay the video configuration,
showing your update.
Note:
Assign video and elementary PIDS as necessary according to the system’s
network distribution requirements.
4. At the
Select parameter to change or press Enter to accept:
prompt, select
another parameter to change, if desired, and follow the prompts, or press
Enter
to accept
the displayed configuration parameters and return to the
Command >
prompt.
