LG AK3GEUS, Справочник данных

Страница: 35 / 79

35 Product Data
YA Chassis
PTAC
6RWU0-06A
2. Control Device
2.1 Control Panel
4 3 2 1
5
6
Power
Press to turn the air conditioner ON or OFF.
Delay ON/OFF Timer
Delay ON
- When the air conditioner is off, set it to
automatically turn on from 1 to 24 hours later, at its
previous mode and fan settings.
Delay OFF - When the air conditioner is on, set it to
automatically turn off from 1 to 24 hours later.
NOTE
• Each press of the Timer button advances the
timer by 1 hour. After the last press the display
returns to the temperature setting.
Fan Speed
Press to set the fan speed to SLo(F1), Low(F2),
Med(F3), High(F4). It cycles through the settings as
follows: {High(F4) → Med(F3) → Low(F2) →
SLo(F1) → High(F4)}
Operation Mode
Press the Mode button to cycle between 4 types of
air conditioner operation: Heat / Cool / Fan / Dry
Heat - This mode is ideal on cold days to warm the
room quickly. Use the Temp buttons
to set the desired room temperature and use the
Fan Speed button to set the desired fan circulation
speed.
Cool - This mode is ideal on hot days to cool and
dehumidify the room quickly. Use the Temp
buttons to set the desired room
temperature and use the Fan Speed button to set
the desired fan circulation speed.
Fan - In this mode the fan circulates air but the
compressor does not run. Use the Fan Speed
button to set fan speed to High, Medium, Low or
Slow. In this mode, you cannot adjust the set
temperature.
Dry - This mode is ideal for rainy and damp days to
dehumidify the room rather than cooling it
significantly. Moisture is removed from the room by
the combination of compressor operation and the
fan speed fixed at Low.
The compressor and fan turn off once the set
temperature is reached. Fan speed cannot be
adjusted in Dry mode.
Temperature Control
The thermostat monitors room temperature to
maintain the desired temperature.
The thermostat can be set between 54°F -
86°F(12.2°C - 30°C) in cool/heat mode.
Press
∨
or
∧
arrows to increase or decrease
temperature setting.
Wi-Fi
Enables connection of the air conditioner to the
home Wi-Fi. You need to purchase additional
accessories to use this mode.
NOTE
• Auto Restart : If the air conditioner turns off due to a
power outage, it will restart automatically after 3
minutes (time delay) once the power is restored, with
the same settings as were set before the unit turned
off.
• Energy Saver : This mode can be set by digital
control. Refer to the 'Digital Controls' section for the
setting method.
1
2
3
4
5
6