78
206-4325
Reference: Using the TV Zoning Feature
This section describes the TV Zoning feature available with the UV570H/UV572H model TVs. The TV
Zoning feature enables you to create localized configurations for TVs in selected “Zones” within the
installation site, for example, a hotel lobby, fitness center, restaurant, etc. This feature is primarily intended
for use when the TV is configured for FTG Mode operation. However,
selected elements of TV Zoning
(Installer Menu and Setup Menu profile Zone assignments) may also be used with TV cloning processes
using a Clone (.tlx) file.
Refer to the appropriate section(s) below for further information on the TV Zoning feature and how to set
the TV Zone # in a TV that is currently in Pass-through Mode.
Using the TV Zoning Feature with FTG Mode via CPU Configuration
The Cloud Configuration Tool may be used to create an FTG Configuration (.tlx) file that contains multiple
Installer Menu and Setup Menu profiles, each with its own Zone assignment. Up to nine unique Zones
can be designated for UV570H/UV572H
FTG Installer Menu and/or Setup Menu profiles. Zone restrictions
can also be placed on individual channels in the FTG Channel Map. Thus, for example, you may create
an FTG Installer Menu and/or Setup Menu profile to uniquely configure a TV in the hotel lobby and also
restrict the channels that are available to be tuned on that TV.
The TV Zone # must be set appropriately on each TV in order for the TVs to be configured correctly. See
“Set the TV Zone # in the TV” on page 79, and set the TV Zone # in all the TVs in a select area, so that
the TVs are configured with corresponding FTG Installer Menu and/or Setup Menu settings and/or can
omit channels that have been restricted in the FTG Channel Map. TV Zone 0 is the default TV Zone #.
The following subsections briefly describe how to assign Zones in the Cloud Configuration Tool. Refer to
the
Cloud Configuration Tool User Guide
for further information.
FTG Installer Menu Profile Zone Assignments
The Cloud Configuration Tool / Installer Menu web page enables you to create multiple Installer Menu
profiles for the same chassis model, each with a different Zone assignment (default = Zone 0), to be
included in an FTG Configuration (.tlx) file. For example, you may wish to create one Installer Menu profile
for the UV570H/UV572H
TV in the hotel lobby and another Installer Menu profile for the UV570H
/UV572H
TV in the fitness center, both of which are different from the Installer Menu profile used for UV570H
/UV572H
TVs in standard guest rooms. The TV Zoning feature enables you to save multiple UV570H/UV572H FTG
Installer Menu profiles, each with its own Zone assignment, in one FTG Configuration file. If each TV in the
aforementioned locations (Zones) has had its TV Zone # set appropriately, as described in the procedure on
or via the EZ-Manager Wizard, the TV(s) will only be configured by the Installer Menu profile that
matches its(their) Zone setting.
In the Cloud Configuration Tool /
File Manager web page, you can also change the Zone assignment for
each Setup Menu profile already present in the FTG Configuration List. See the File Manager and Installer
Menu web page overviews on pages 54 and 56
for further information. Note that Setup Menu profiles cannot
be created in the Cloud Configuration Tool; they must be saved (exported) from a TV.
FTG Channel Map Zone Restrictions
In the Cloud Configuration Tool / Channel Map
web page, you can place Zone restrictions on individual
channels that may be prohibited or deemed unsuitable for certain locations. One or more Zone restrictions
(1–8) may be placed on each channel that is to be restricted. For example, if you wish to restrict a channel
from Zones 2 and 4, select both “Zone 2” and “Zone 4” in the Restricted from Zones field when defining or
editing that channel.
Note:
While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one
Zone. See also the Channel Map web page overview on page 55.
