60
206-4325
IP Environment Setup (Cont.)
(Continued on next page)
(Continued from previous page)
Note:
If the Data Channel has already been set in the Installer Menu (Installer Menu item 119)
or in the EZ-Manager Wizard, the specified channel will appear in the
Data Channel data entry
field. If you change the Data Channel in this menu, Installer Menu item 119 will now show the
value you entered here.
IP Configuration
Note:
If the server IP address and port number or domain name have already been set in the
EZ-Manager Wizard, the specified data will be reflected in the fields displayed.
Note:
Setting the Media Type to “IP” automatically sets item 119 DATA CHANNEL in the Installer
Menu to 253. You cannot alter this setting unless you revert Media Type to “RF.” Also, it is not
possible to direct enter “253” in the Installer Menu.
a)
The Server Address field provides the option to specify the domain name of the Pro:Centric
server instead of the server’s IP address. Select/highlight the
Server Address
field and
press
OK
on the Installer Remote. Then, use the Up/Down arrow keys to select either
IP Address
or
Domain Name
from the drop-down list of options for defining the server.
b) Depending on your selection in the previous step, either:
•
Enter the Pro:Centric server IP address in the IP Address field. The IP address must
match the IPv4 multicast address that is set in the Pro:Centric server.
•
Enter the Pro:Centric server domain name in the Domain Name field. Note that in order
for the domain name to be resolved to an IP address, there must be a DNS entry for the
domain name.
For each data entry field: Use the arrow keys to select the field and press
OK
. Then, you
can either use the number keys on the Installer Remote to direct enter data values, or you
can use the arrow keys to select the appropriate number(s)/alphanumeric character(s) from
the pop-up virtual keyboard displayed at the bottom of the screen. When you are done,
select
Enter
from the virtual keyboard, and then press
OK
on the Installer Remote.
c) Enter the Pro:Centric server port number in the Port Number
field. The port number must
match the port number that is set in the Pro:Centric server.
4.
Select/highlight the
Mode
field and
press
OK
on the Installer Remote to display the drop-
down list of options. Then, use the Up/Down arrow keys to select the appropriate Pro:Centric
Application Mode setting—
Configuration Only
,
FLASH
,
GEM
, or
HTML
. If the Pro:Centric
Application Mode is set to “Configuration Only,” Pro:Centric application data will not be down
-
loaded.
Note:
If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in
the EZ-Manager Wizard, the specified mode will be reflected in this field. If you change the
mode in this menu, Installer Menu item 098 will now reflect the value you selected here.
5. Select/specify the appropriate Update Event setting(s), as required. Based on Update Time
settings, the Wake For Update feature wakes the TV once daily to check for, and if applicable,
download updates from the Pro:Centric server. See Installer Menu item 121 UPDATE TIME HR
description on page 40 for additional information on Wake For Update functionality.
