33
MAINTENANCE
ENGLISH
MAINTENANCE
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read this entire owner's manual,
including the Important Safety Instructions, before operating this washer.
•
Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning can
cause serious injury, fire, electric shock, or death.
•
Do not use volatile substances (benzene, paint thinner, alcohol, acetone, etc.) or detergents with strong
chemical components when cleaning the washer. Doing so may cause discoloration or damage to the
machine, or may cause a fire.
NOTE
•
Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.
Regular Cleaning
Care After Wash
After the cycle is finished, wipe the lid and the inside
of the lid seal to remove any moisture.
•
Leave the lid open to dry the tub interior.
•
Wipe the body of the washer with a dry cloth to
remove any moisture.
Cleaning the Exterior
Proper care of your washer can extend its life.
Lid:
Wash with a damp cloth on the outside and inside
and then dry with a soft cloth.
Exterior:
•
Immediately wipe off any spills.
•
Wipe with a damp cloth.
•
Do not touch the surface or the display with sharp
objects.
Care and Cleaning of the Interior
•
Use a towel or soft cloth to wipe around the washer
lid opening and lid glass.
•
Always remove items from the washer as soon as
the cycle is complete. Leaving damp items in the
washer can cause wrinkling, color transfer, and
odor.
•
Run the Tub Clean cycle once a month, or more
often if needed, to remove detergent buildup and
other residue.
Cleaning the Tub
•
Some environmental and usage conditions can
cause a residue to build up in the tub over time
and can lead to a mildewy or musty smell. Periodic
use of Tub Clean cycle helps to prevent mildew
or a musty smell. Run the Tub Clean cycle once a
month, or more often under heavy use conditions or
if odor is present.
1
Remove any clothing from the tub.
2
Add cleaning agents.
•
For other tub cleaning products, follow the
cleaner manufacturer’s instructions and
recommendations.
•
Do not exceed the manufacturer's
recommended amount when adding bleach or
powdered cleaners. Powdered detergent may
remain in the tub after cleaning.
3
Close the lid and press the
Power
button to turn
the washer on.
4
Press the
Tub Clean
button and close the drawer
to start the cycle.
5
After the cycle ends, open the lid and allow the
tub interior to dry completely.
