GDC-480H Wireless Handset
User Guide
47
desired, you can assign a CO access code the handset will send and receive in front of a
Phonebook number for each separate zone. For proper operation of the Phonebook, your
general CO line code should be used (ex., ‘9’ or ‘0’). Each of the four CO access codes is
assigned to each of the subscribed systems; CO Code 1 is for Base (zone) 1, CO Code 2 is
for Base (zone) 2, etc. If a code is not entered, it must be entered as the first digit(s) of the
telephone number in the Phonebook.
To assign a CO Code:
1. Select the Phone Settings menu from the User Menu.
2. Use the
Navigation
( ) button to highlight the CO Code selection.
3. Press the
OK
( ) left soft button to access the sub-menu.
4. Use the left or right arrow of the
Navigation
( ) button to select the code.
Code 1 – code for Zone 1
Code 2 – code for Zone 2
Code 3 – code for Zone 4
Code 4 – code for Zone 4
5. Press the
OK
( ) left soft button to select the code number.
6. Use the dial pad to enter a CO access code (may be provided by System
Administrator).
7. Press the
OK
( ) left soft button to store the setting.
8. Press the
End
( ) button.
5.6.9 Missed Call Mode
The missed call log is maintained by the handset. In cases where the host system alerts
multiple phones including your wireless handset and another phone answers, the handset
registers a missed call. This may lead to a near constant display of “xx missed calls”. You
can enable or disable the display of this missed call message.
To enable or disable the missed call message;
1. Select the Phone Settings menu from the User Menu.
2. Use the
Navigation
( ) button to highlight the Missed Call selection.
3. Press the
OK
( ) left soft button to access the sub-menu.
4. Use the left or right arrow of the
Navigation
( ) button to select Yes or No.
5. Press the
OK
( ) left soft button to accept the date.
6. Press the
End
( ) button.
5.6.10
Range Out Beep
When out-of-range for more than 30 seconds, the phone will beep every 3 seconds. If you
expect to be Out-Of-Range for an extended period you should turn the handset power OFF.
If, for example, you leave the office with the handset on, the Out-Of-Range beep alerts you
to turn the handset power OFF.
To disable the Out-Of-Range beep:
1. Select the Phone Setting menu from the User Menu.
Содержание IPECS GDC-480H
Страница 68: ...GDC 480H Wireless Handset User Guide 58 9 GDC 480H User Menu ...
Страница 69: ...GDC 480H Wireless Handset User Guide 59 ...
Страница 70: ...GDC 480H Wireless Handset User Guide 60 ...
