LG-Ericsson IPECS GDC-480H Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 70

background image

GDC-480H Wireless Handset
User Guide

Important Care & Precautions:

Before connecting or using your new phone, take a moment to consider safety and reliability.
Use common sense when locating, connecting and using your GDC-480H



The GDC-480H uses 3.7 VDC Li-ion batteries. Replace batteries only with identical

size and type available from your local Ericsson-LG Enterprise dealer. Use of a
different battery type may cause damage to the phone or charger and may cause fire or
explosion. Dispose of batteries in accordance with any local codes or regulation.



The Chargerbase unit should only be used on a dry level surface. Keep the

Chargerbase away from the edges of the surface to avoid the potential of a fall.



Avoid situations where you might drop the handset. While the GDC-480H is a rugged

mobile device, dropping it on to the floor may cause critical damage.



Locate cables to avoid potential for damage. For example, do not place under rugs or

carpet as damage may result from foot traffic or heavy objects. Also, do not locate
cables between the desktop and walls where they may be crushed, damaging the
insulation.



Check cables regularly, and if damage is noted, disconnect your phone. Contact your

local representative for a replacement.



Should liquid spill on the handset, remove the batteries and dry with a soft cloth.



Do not use during lightning storms. Lightning presents a potential shock hazard.



Clean the GDC-480H with a soft dry cloth; do not use liquid cleaners.



Always use caution when connecting to AC power. Use only with a properly grounded

standard AC power outlet.

What is new in this release?

Issue

Date

Change of Contents

1.0
1.1

April, 2013

July, 2015

- Initial Release
- Added the caution of Battery handling and
warranty information, etc.
- Updated VSF mail content
- Make the common user guide for GDC-GDC-550.

Copyright© 2013 Ericsson-LG Enterprise Co., Ltd. All Rights Reserved

This material is copyrighted by Ericsson-LG Enterprise Co., Ltd. (Ericsson-LG Enterprise). Any unauthorized
reproductions, use or disclosure of this material, or any part thereof, is strictly prohibited and is a violation of
Copyright Laws. Ericsson-LG Enterprise reserves the right to make changes in specifications at any time
without notice. The information furnished by Ericsson-LG Enterprise in this material is believed to be accurate
and reliable, but is not warranted to be true in all cases. If you are not the intended recipient, you should
destroy or retrieve this material to Ericsson-LG Enterprise.

iPECS is trademark of Ericsson-LG Enterprise Co., Ltd.

All other brand and product names are trademarks or registered trademarks of their respective companies.

Important Safety Information

«
...
2
3
4
5
6
...
»

Содержание IPECS GDC-480H







































































Отзывы:

Нет отзывов

Похожие инструкции для IPECS GDC-480H

Бренд: Pantech Страницы: 145

Бренд: Paradox Страницы: 44

Бренд: EE link Страницы: 10

Бренд: NEC Страницы: 61

Бренд: T-Mobile Страницы: 211

Бренд: Alcatel Страницы: 44

one touch Fire 4012X

Бренд: Alcatel Страницы: 31

Бренд: T-Mobile Страницы: 2

Бренд: Sagem Страницы: 72

Бренд: Mobistel Страницы: 24

Бренд: Lava Страницы: 20

Бренд: Motorola Страницы: 76

Бренд: Avvio Страницы: 24

Бренд: Avvio Страницы: 34

Бренд: Zte Страницы: 143

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды