LG-Ericsson IPECS GDC-480H Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 70

background image

GDC-480H Wireless Handset
User Guide

16

4) From this menu select External Ring or Internal Ring to set the ringer volume for

external or internal calls respectively and press the.

OK

( ) button.

5) Use the Left and right arrows of the

Navigation

( ) button to highlight the volume

level and press the

OK

( ) button.

Or Press the Side button.

3.3 Muting your Microphone

During a call, you can mute the microphone so that the connected party can’t hear what is
said in your vicinity. While the Mic. is muted you will still hear the connected party.

To mute the microphone while on a call:

1. Press the

Option

( ) left soft button. The handset displays the Call Options menu.

2. Use The Up and Down arrows of the

Navigation

( ) button to highlight Mute and

press the

OK

( ) button; MUTED is shown in the display.

To deactivate Mute so that the connected party can hear you:

1. Press the

Enable

( ) right soft button, the function is deactivated.

3.4 Placing an Outside Call

While the phone is idle, you may dial a call (up to 24 digits). The display indicates the last 11
digits dialed. In case an error occurs during dialing, you may delete the last or all digits
using the

delete

( ) right soft button. Pressing the button deletes the last digit, holding

the button pressed for more than 1 second deletes all digits.

To Place a call:

1. Dial the phone number; remember you may need to dial an access code such as ‘9’

to place an external call.

2. Press the

Talk

( ) button; the Phone icon ( ) displays and the number dials.

You alternatively can press the

Talk

( ) button prior to dialing. In this case, when you

press the button you will receive a dial tone and may then dial the number. Note that unlike
the pre-dialing above, digits cannot be deleted.

3.5 Releasing a Call

While on an active call, incoming or outgoing, you may release the call at any time.
To release a call:

1. Press the

End

( ) button. The wireless terminal ends the call and returns to an

idle state.

«
...
24
25
26
27
28
...
»

Содержание IPECS GDC-480H







































































Отзывы:

Нет отзывов

Похожие инструкции для IPECS GDC-480H

Бренд: Yealink Страницы: 87

Бренд: 8*8 Страницы: 5

Бренд: Samsung Страницы: 22

Бренд: TCL Страницы: 18

Бренд: Polycom Страницы: 36

Бренд: Kosher Страницы: 19

Бренд: Ulefone Страницы: 47

Бренд: AU Страницы: 55

Бренд: Panasonic Страницы: 14

Бренд: AEG Страницы: 224

Бренд: Zte Страницы: 24

Бренд: Zte Страницы: 24

Бренд: Zte Страницы: 112

Бренд: Zte Страницы: 10

Бренд: Zte Страницы: 88

Бренд: Verizon Страницы: 46

Бренд: Acer Страницы: 91

Бренд: Acer Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды