LG-Ericsson IPECS GDC-480H, Руководство пользователя

Страница: 60 / 70

GDC-480H Wireless Handset
User Guide
50
 Base ID
 Reset
4. From the Phone Register menu select “Subscription” using the up and down arrows of
the
Navigation
( ) button and press the
OK
( ) button.
5. Select an available BASE station number and press
OK
( ) button. The GDC-480H
searches for the system, displaying and “Searching..x”. When a system is found, the
corresponding Radio Fixed Part Identification (RFPI) is displayed (verify the RFPI with
the System Administrator or Attendant).
5.7.1 Subscription
In order to obtain services from a base station or zone, the handset must establish a
subscription with the zone. The handset may subscribe to four (4) base stations or zones
simultaneously. When subscribing to the system you will need the RFPI and Authorization
code, which may be available from your System Administrator. Also, before starting the
subscription process make sure you are in range of the desired zone and the Received
Signal Strength Indicator (RSSI) indicator is steady, showing at least 2 bars.
To subscribe to a system, from the GDC-480H:
1. Verify that press the
Menu
( ) button to display the menu.
2. From the menu, use the
Navigation
( ) button to highlight Phone Register.
3. Press the
OK
( ) left soft button to display the Phone Register menu.
4. Select “Subscription” using the up and down arrows of the
Navigation
( ) button
and press the
OK
( ) button.
5. Select an available BASE number (up to 4) and press the
OK
( ) button; the GDC-
480H searches for the system and displays “Searching..x”. When a system is found,
its RFPI is displayed (verify with your System Administrator, or the Attendant).
6. Press the
OK
( ) button to subscribe to the system (RFPI shown). Press No ( )
button to continue searching.
7. Enter the Authorization code (available from the System Administrator, as needed).
8. Press the
OK
( ) button; confirmation tone will be heard is received at the GDC-
480H and the Attendant’s LCD will display “Subscription Done”.
9. Press the
End
( ) button.
If the subscription fails, repeat above Steps 3 - 6 from the Attendant Station, and Steps 1 - 8
from the GDC-480H.

Note
According to the system or radio channel environment, the system or the wireless terminal
periodically may not recognize that the system has the subscribed wireless terminal or the
wireless terminal is subscribed to the system. Once a user has performed the subscription
procedure, try to make a call first. Then, if a user can’t make a call, try to subscribe the
wireless terminal again after verifying the terminal is unsubscribed (described in the following
chapter). It is recommended all other DECT systems be disabled while performing the
Subscription procedure.